Tips From the Moving Company Pros: How to Move a Pinball Device



With pinball making a substantial resurgence throughout the nation, Gentle Giant wants to make certain that these classic, gorgeous makers remain damage-free while being transported. Oh, and we desire individuals moving them to be safe, too.

Initially glimpse, pinball makers can appear intimidating to move since of their fragility, size, and weight. Thankfully, our competent Giants have a couple of techniques up their sleeves to ensure your pinball is moved with ease.
Folding Down the Headbox

The majority of modern-day pinballs (made in the last Twenty Years or so) have a hinge system which enables the headbox to be folded down. Early pinball makers had their headboxes bolted on, utilizing either two or four bolts. All Electro-Mechanical pinballs utilize this system, in addition to the early Solid State machines.

Later makers have hinges and utilize a latching system to keep the headbox upright. There may likewise be 2 bolts inside as included safety, in case the latch is broken or inadvertently un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball makers, you need to remove the headbox rear access panel to get to the bolts and plugs within. Usually this panel has a lock on it to keep it in place, however gradually the secret may have been lost. On a regular basis, there is a screw keeping this panel in location.

As soon as inside, remove the bolts and unplug the big adapters that have circuitry going down into the machine. You may wish to identify these adapters to put them back in the right spot, however they must be various sizes, making it difficult to plug back incorrectly.

You can now eliminate the headbox totally, or fold the headbox down onto the playfield glass. Make certain you utilize some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will help keep the back glass in place.
Early Solid State Pinballs

For early Strong State Pinballs, you will require to get rid of the back glass. There is a lock located on the headbox in one of three places: the left-hand side at the top, right-hand side at the leading or on top of the headbox in the center.

When opened, get rid of the back glass by raising it up utilizing the lift channel (at the bottom of the glass), and then pull it out from the bottom.

Then, open up the back box lamp panel by lifting the lock situated on either the left-hand side or right-hand side. The panel can now swing out towards you, and provide you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs require you to raise up the light panel in order to swing it open.

Now that you are within, you can get rid of the bolts, and any plugs that have wires going down into the machine. You may wish to label these plugs to put them back in the best area. You might not have to get rid of the plugs, as the circuitry should be long enough to allow the headbox to be folded down.

At this point, you can lock up the lamp panel and change the back glass.
Modern Strong State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable lock system situated at the back of the headbox. Utilizing the supplied key, turn the latch 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can easily unlatch the back box at the back of the device. This is an easy setup and needs no tools.

You're done if you can now fold down the head box onto the cabinet. Make certain you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will likewise help keep the back glass in place.

If you can not fold the head box down, then you need to get inside. There is a lock located at the top of the back glass in the center. Utilize the provided secret to unlock, and get rid of the back glass by raising it up from the bottom, then pulling it out from the bottom.

Next, you will have to get rid of the display screen panel. You can do this by raising it up and out. Open the lamp panel. There will be a latch located on either the right-hand or left-hand side. (Some newer Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

Eliminate the two bolts, put the back box back together, and fold down the head box onto the cabinet. Ensure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in location.
Eliminating the Legs.

Pinball Maker legs are held in location by 8 bolts. The contemporary pinballs have captive nuts or threaded plates inside for the bolts to screw into.

These captive nuts and threaded plates can be damaged, and the use of extra nuts may have been required. If this is the case, you will need to open up the front door of the pinball, slide out the playfield glass, and raise the playfield.

With the front door (coin door) open, move the lock down bar latch throughout and get rid of the lock down bar. Move out the playfield glass, and put in a safe location. Next, raise up the playfield by putting your hand where the ball drains pipes, and raise the playfield up.

You ought to now have access to any nuts that may have been used. Once any nuts have been removed, replace the playfield glass and lock down bar, and lock the front door.

Be sure to mark or keep in mind which legs are for the front and back, as they will be changed in a different way to match.
Filling the Pinball.

You are now prepared to transfer your pinball device. Before you pack it, make sure you remove the pinballs so they don't bounce around during transportation.

If you are moving the pinball utilizing a van or SUV, it might be much easier to eliminate the legs simply prior to packing the device. Get a buddy to have and help one of you supporting the pinball, while the other removes the front legs. Move the maker in, and after that eliminate this website the back legs. It is a lot easier to pack the machine front first.

Make certain you strap the pinball in, as you do not desire it moving if you need to stop all of a sudden!

For Electro-Mechanical pinball devices, you need to remove the headbox rear access panel to get access to the bolts and plugs within. (Some more recent Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

If you are moving the pinball utilizing a van or SUV, it might be simpler to eliminate the legs just a fantastic read prior to loading the maker. Get a pal to have and help one of you supporting the pinball, while the other gets rid of the front legs.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Tips From the Moving Company Pros: How to Move a Pinball Device”

Leave a Reply

Gravatar